Mark MM 120 A DSP Manual Del Usuario página 4

INPUT A:
Line inputs: Connect audio signal (LINE level), using these connectors (Combi or RCA). This
input incorporates Volume knob.
The Bluetooth audio in controlled using this input.
INPUT B:
Mic/Line inputs: Connect audio signal (LINE level), using this connector (Combi). This input
incorporates Volume knob.
Use the MIC/LINE switch to select the audio source.
MIX OUT:
This connector provides a signal to another active speaker.
DSP Preset:
This active monitor loudspeaker incorporates 5 DSP presets (Normal, DJ, VOICE, LIVE & FLAT).
Use the knob to select the correct preset. The selection will be indicated with the LEDs placed
in the upper side.
MASTER VOLUME
Use it to control the final volume of the device.
PHONES:
Connect headphones and control the volume with its knob.
AC INPUT:
Use the included IEC Schuko cable to connect the device to the adequate power supply.
3