Publicidad
Idiomas disponibles
Idiomas disponibles
GB
been successfully connected. Then pair one of the
two Juna speakers with the BT audio source. After a
successful connection, the audio data is output via both
speakers.
To cancel the TWS connection, press the Play/Pause
button
on one of the two devices until you hear a
confirmation.
Attention: When connecting the soundbar to TWS
for the first time, the Bluetooth
smartphone must be switched off while setting up
the TWS connection.
®
Activate the Bluetooth
connected to each other via TWS. To connect the
Juna and smartphone, proceed as described under
‚Bluetooth connection'.
Music playback
Playing music via Bluetooth
Start music playback on the Bluetooth
with the Juna. The music is transmitted to the Juna
and output. Stop the music playback of the Bluetooth
source to interrupt the music streaming.
Note: The BT source must support the A2DP and
AVRCP profile in order to play and control music via
the Juna.
Music control
(BT mode, MicroSD card mode, USB mode)
To play or stop music, briefly press the play/pause
button
.
To skip to the previous track, briefly press the track
back button
.
To skip to the next track, briefly press the track
forward button
.
Playing music from USB memory and
MicroSD card
Connect a USB stick (8) or a MicroSD card (7), the
soundbar automatically switches to this source. If a USB
device or a memory card is already inserted, you can
switch between the modes by pressing the mode button
. The respective mode is announced. Press the
play/pause button
to start or pause playback.
Press
or
to play the previous or next track.
9
®
function of your
function after both Juna are
®
®
source paired
NOTE: It is recommended not to use folders to store
your audio files. The device can read mp3, wav or
wma files. Both USB devices and memory cards
should not be larger than 32 GB.
Playback via AUX
You can connect an external audio source such as a
PC, notebook or telephone using the 3.5 mm line-in
cable supplied. Connect the cable to the source device
and then to the AUX connection (9), the speaker will
automatically switch to this source.
You can also switch to AUX-In mode by pressing the
mode button
be connected to the AUX connection). In AUX-In mode,
briefly press the play/pause button
the current playback. Use your source device to
navigate between the tracks.
FM radio
Insert the charging cable into the charging port (6), the
cable acts as an antenna. Make sure that the cable is
®
not connected to the power adapter when using it as an
antenna. Press the mode button
mode. To search for and store FM stations, briefly press
the Play/Pause button
ching for the stations with the strongest signal and store
them automatically. The Soundabar can store up to 99
FM stations. Press
station to the previous or next stored station.
Hands-free function
A built-in microphone makes the soundbar suitable for
use as a hands-free speaker for phone calls.
Note: At high volumes, feedback may occur with the
microphone. This leads to echo on the telephone
side, not on the hands-free side.
Answering/ending a call
To accept an incoming call, briefly press the
play/pause button
To end an ongoing call, briefly press the
play/pause button
To reject an incoming call, press and hold the
play/pause button
on the device (a source device must
to start or stop
to switch to radio
, the speaker will start sear-
or
to switch from the current
.
.
.
GB
10
Publicidad
