Publicidad
Idiomas disponibles
Idiomas disponibles
5. Enter the WLAN password for the wallbox (network
key) from the access data letter.
6. When the connection has been established suc-
cessfully, open the browser.
7. Enter the host name of the wallbox from the access
data letter in the address bar. The login area is dis-
played in the web app with a login option.
8. Select Standard user as the user role.
Note
System settings can only be made as the
Service user, see operating instructions.
9. Enter the password for the Standard user (from
access data letter).
After a successful login, the Overview is dis-
played.
There are now two quick start options for charging the
vehicle:
Access protection remains disabled, vehicle is
l
charged without authentication, see Charging a
vehicle without authentication (Free
Enable access protection and register the RFID
l
chip, see Registering the RFID
Registering the RFID chip
Risk of injury due to RFID sensor for persons
with cardiac pacemaker or defibrillator
1. In the web app / mobile app, select Vehicle man-
2. Disable Free charging.
3. Select Add RFID chip.
4. Hold up the RFID chip to the RFID sensor (5) on
5. Wait until the RFID chip has been identified.
charging).
chip.
DANGER
If you use a cardiac pacemaker, maintain a dis-
n
tance of at least 60 cm from the RFID sensor on
the front panel.
If you use a defibrillator, maintain a distance of
n
at least 40 cm from the RFID sensor on the front
panel.
agement, Approved list in the navigation.
the front panel of the Wallbox.
A beep sounds and the RFID LED (5) lights up
green briefly as soon as the RFID chip has been suc-
cessfully identified.
11
Publicidad
