Publicidad
Idiomas disponibles
Idiomas disponibles
6� Default and Custom
Settings
Use the AeroGuard Android or
iOS App, or the www.My-
Plymovent.com web portal to
interact with your AeroGuard
modules.
Both platforms can be used to
change basic settings and gain
insights in your collected data.
The LED-ring always displays
the current status of the prima-
ry sensor measurements. The
LED-ring color changes based
on the thresholds set in the app
or portal. The primary sensor is
set to PM
by default, with the
2.5
first threshold (orange) set at
1000 μg/m
, and the second
3
threshold (red) at 2000 μg/m
Change the primary sensor
Feature
Interface
Users
Data History
Relay Output
Particulate
Matter
Calibration
EN - 6
.
3
App
(Free)
iOS & Android App
Max. 3
30 days
Only primary sensor:
Fair = R1,
Bad = R1 & R2
3 Pre-set Profiles
and the thresholds in the app
or portal. Note: this can have
impact on the output relays.
To make sure your AeroGuard
reflects your situation as accu-
rately as possible, go through
the calibration settings in the
app or portal. These options
include calibrations for dust
(particulate matter) and CO
well as temperature and humid-
ity offsets.
With a monthly/yearly MyPlym-
ovent Portal subscription, you
unlock more features and cus-
tomizability. The key differences
are listed below. (Note: fea-
tures may be added, changed,
or removed).
Web Portal
(Paid Subscription)
iOS & Android App
web portal on
www.MyPlymovent.com
Max. 100
Unlimited
Both relays inde-
pendently program-
mable
3 Pre-set profiles &
custom calibration
possible
, as
2
Publicidad
