FTE Maximal COMPACT 3 HD Manual Del Usuario página 59

USER'S MANUAL COMPACT 3 HD USER'S MANUAL
DATA SERVICE PORT
Connector
Data Protocol
File Management System
File Format
POWER SUPPLY
Li-Ion Battery
Adapter
Power Consumption
PHYSICAL CHARACERISTICS
Dimensiones (W x D x H)
Peso neto
5 TROUBLE SHOOTING TROUBLE SHOOTING
Problem
No display light up
No sound or picture,
but the front panel
power light is ON.
No sound or picture
Bad picture/
Blocking Error
AV out No picture
(Video)
The key is
working
Reserved for technical modifications and/or erors
USB
USB2.0 interface
NTFS,FAT32,FAT16
wma,mp3,mp4,avi,jpg,jpeg,bmp,img
7.4V/5000mAh(The machine behind
labeling shall prevail)
OUTPUT :DC12V/1.5A, INTUPT
:100~240VAC 50/60Hz(Will
be subject to actual configuration)
Max. 10W
250 x 180 x 60 mm
2,2 kg
Possible Causes Possible Causes
Power switch is not on Run Power switch is not
out of batteries out of
AV IN jack insert, but no AV IN jack insert, but no
video input video input
The satellite dish is not The satellite dish is not
pointing at the satellite. pointing at the satellite.
No signal or weak signal No signal or weak signal
The satellite The satellite dish in not
pointing at the pointing at the satellite
Signal is too strong Signal is too strong
Satellite dish is too small Satellite dish is too small
LNB noise factor too high LNB noise factor too high
The LNB is faulty The LNB
The system is connected by The system is connected by
SCART cable and TV is SCART cable and TV is
not in AV mode. not in AV mode.
Out of battery Out of battery
not
Key blocks Key blocks
What To Do
Check to make sure power Check to make sure power on.
Even on adapter Even on adapter
Pull out AV IN cable Pull out AV IN cable
Adjust the dish. Check the Signal Adjust the dish. Check the Signal
Level in the Antenna Level in the Antenna
Setup Menu
Chec k k the the
LNB a nd nd
connected between the LNB and between the LNB and
the meter and adjust and adjust the dish.
Adjust the dish.
Connect a signal attenuator Connect a signal attenuator
to the LNB input to the LNB input
Change to a larger dish Change to a larger dish
Change to an LNB with Change to an LNB with
lower noise factor lower noise factor
Change the LNB Change the LNB
Check the UHF Check the UHF channel fixed in
your system and your system and tune the UHF
properly.
Even on adapter Even on adapter
make sure no blocks make sure no blocks between the
front panel
-23-
Compact 3 HD Version en_1.0 Compact 3 HD
cable cable connections. connections.
other other equipment equipment
Fte maximal