Contours AQ603 Instrucciones De Montaje página 3

This product works with multiple cribs- illustrations may vary from your model
Step 1:
A. Undo the six screws attaching the Side to the Ends and remove the side.
B. If it is not already, adjust the Mattress Support to its lowest position by loosening the four screws on the
support arms, moving them to the low position holes, and tightening all four screws.
Undo 3 screws on
each side
Mattress Support
Should be set to lowest position
A - End
B - Side
Thread and tighten
High Position
Middle Position
Low Position
all four screws
ContoursBaby.com | 3