Lenco DAR-061BK Manual Del Usuario página 13

Turn the 'Prev/Next' knob on the unit or press the
highlight the desired Station list setup, then press the OK button on the unit or press the OK
button on remote control to enter the DAB station list. Turn the 'Prev/Next' knob on the
unit or press the
OK button on the unit or press the OK button on remote control to confirm.
Full scan
Turn the 'Prev/Next' knob on the unit or press the
highlight the desired Full Scan setup, then press the OK button on the unit or press the OK
button on remote control to confirm.
FM Mode
Selecting FM mode
If you are in other mode, press the Power I Mode button to enter the mode icon, this will
be shown in the LCD display. Turn the 'Prev/Next' knob on the unit or press the
button on remote control to choose the FM icon, or press the mode button on the remote
control, then press the OK button on the unit or press the OK button on remote control to
confirm.
Storing FM station presets
It is possible to store up to 10 of your favourite FM stations. This will enable you to access
your favorite stations quickly & easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold the PRESETbutton for 1 second. The LCD will then show "Preset"
2. Turn the 'Prev/Next' knob on the unit or press the
choose the preset number from 1-10 you wish to use,
unit or press the OK button on remote control to
Recalling FM station presets
1. You can recall the preset stations list by pressing the PRESET button or press the
button on the remote control.
2. Turn the 'Prev/Next' knob on the unit or press the
select the preset station,
on remote control to activate.
NOTE: If you choose a preset that hasn't been allocated a station, then "Preset Empty" will
be displayed.
FM Scan
1. Press and hold either the
to scan up or down the frequency range. When a station is found the scan will stop and
play the located station.
2. You can fine tune the frequency by pressing either the Prev or Next buttons or press the
on the remote control to advance 0.05 MHz with each press.
3. Press the scan button on the unit or scan button on the remote control to scan the
frequency range, when a station is found the scan will stop and play the located station.
button on remote control to select the DAB
then press the OK button on the unit or press the OK button
buttons on the unit or
13
button on remote control to
station,
button on remote control to
button on remote control to
then press the OK button on the
store the preset.
button on remote control to
on the remote control
then press the