Important information about installing
• This appliance is NOT intended for use in a commercial
environment.
• Please observe the installation instructions provided and
note that this appliance should only be installed by a qualied
technician.
• The appliance is fitted with a plug and must only be
connected to a properlyinstalled earthed socket.
• In case a new socket is needed, installation and cable
connection must only be done by a quali° ed electrician.
If the plug is no longer accessible following installation,
a pole disconnecting device must be present on the
installation site with a contact gap of at least 3 mm.
• Adapters, multiway strips and extension cords must not be
used. Overloading can result in fire.
• If the appliance is not fitted with a supply cord and a plug,
the connection euipment must have a contact separation in all
poles that provide full disconnection, and the appliance must
be incorporated in the fixed wiring in accordance with the
wiring rules.
Placement
•
Danger! Do not disassemble this appliance. Touching internal components of this
appliance can cause serious personal injury or death.
Place the
steam
•
Make sure that there is surfi
•
and sides keep at least 10 cm free.
Do not cover the air vents.
•
The adjustable feet should not be r emoved.
•
The accessible surfacemay
be hot duringoperation.
oven on a firm,flat surface.
cient ventilation around the
GB
steam
GB-9
oven. At the rear