Publicidad
Idiomas disponibles
Idiomas disponibles
Press the red button to turn the fixture on/off.
To activate full on function, press
To turn on automatic color change jump effect, press
To turn on automatic color change fade effect, press
To turn on Sound-Active mode, press
To turn on strobe effect, press
To change colors, press
or
To adjust the speed of the program, press
To change your DMX address, press
To change running effects, press
The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery contacts prevents the
battery from being discharged during storage. Prior to the first operation remove the foil from the battery support on the rear side of the
remote control. Otherwise operation of the remote control is not possible.
If the range of the remote control decreases, replace the battery. For this purpose, on the rear side of the remote
control press the small bar with the groove to the right (1) and at the same time remove the battery support (2). For
operation, one 3 V button cell type CR 2025 is required. When inserting, pay attention that the positive pole of the
button cell shows upwards in the support.
on the remote control.
on the remote control.
on the remote control.
on the remote control.
on the remote control.
next to
on the remote control.
or
next to
or
next to
on the remote control.
or
next to
on the remote control.
on the remote control.
Publicidad
