Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact
Vornado Air LLC at 1-800-234-0604.
1. Use integrated handle on
back of heater for lifting and
carrying.
2. Position heater so airflow
is not obstructed.
3. Plug power cord into
standard wall outlet.
10 English
CLEANING
Because your heater moves a substantial amount of air, it will need regular cleaning. Cleaning the outside of the heater is recommended
on a weekly basis. If service is required, return your heater to Vornado. See WARRANTY for instructions.
4. Press Power switch
and select Mode. The
amber light illuminates
1. Unplug heater before cleaning.
to indicate the heater is
on. To use as personal
fan, select the center
position on the switch
2. Use brush attachment on
for Fan Only.
household vacuum cleaner to
vacuum any accumulated dust
off Air Inlets on sides.
You should periodically blow
out the heater with pressurized
air to keep heat element and
motor clear of dust, hair and debris
that can build up inside the heater
as it moves air during use. This also
eliminates unwanted odors caused
by accumulation of these particles
inside the unit.
3. Use brush attachment on
household vacuum cleaner to
vacuum any accumulated dust
off the Front Outlet Grille.
4. Wipe down the entire heater
with a soft, dry cloth.
Note: Do not modify the product
with any aftermarket accessory.
11
English
Publicidad
