List of pictograms used
CE mark indicates conformity with
relevant EU directives applicable for this
product.
OIL PUMP 12V
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety
information and instructions for use. Only use
the product as described and for the specified
applications. If you pass the product on to anyone
else, please ensure that you also pass on all the
documentation with it.
Intended use
This appliance is intended to pump out engine oil,
diesel and heating oil. It is intended for private use
only.
The appliance shall not be used for pumping out
flammable liquids like gasoline and petroleum,
transmission oil. Pumping out water, chemicals,
alkalis, foods, paints and varnishes is also not
allowed.
The appliance is not suitable for continuous
operation. It can be continuously operated for
maximum 30 minutes.
Any other use not mentioned in these instructions
may cause a damage to the appliance or generate
a serious risk of injury.
The user is solely responsible for damage or
accidents to other people or their property,
which may occur while using the appliance. The
manufacturer accepts no liability for damages
caused by improper use.
The appliance is not intended for commercial use.
Scope of delivery
After unpacking the appliance, check if it is
complete and if all parts are in good condition.
Remove all packing materials before use.
Oil pump with a battery connection cable
Suction hose
Drain hose
2 hose clamps
Operating manual
Description of parts
Appliance
1 ]
[
On/off switch
[
2 ]
Pump casing
[
3 ]
Battery connecting cable
[
4 ]
Positive pole clamp (+) (red)
[
5 ]
Negative pole clamp (‒) (black)
[
6 ]
Drain hose connector (OUT)
7 ]
[
Protective caps
[
8 ]
Suction hose connector (IN)
Accessories
9 ]
[
Suction hose (Ø 6 mm) (Transparent)
[
]
Hose clamp
[
]
Drain hose (Ø 12 mm) (Grey)
Technical data
Oil pump
Input voltage
Power input
Max. running time t
max
Max. temperature ϑ
max
Protection class
IP rating
Output (pump capacity)*:
diesel fuel/heating oil
engine oil (60 °C)
Max. discharge head
Max. permissible pressure
Weight (incl. accessories)
Sound pressure level
* The capacity may diverge from given data,
depending on the temperature and type of oil.
UOP 12 C1
12 V
(direct current)
60 W
30 min
60 °C
III/
IPX4
approx. 1.5 l/min
approx. 0.2 l/min
0.7 m
0.3 MPa/3 bar
approx. 890 g
approx. 70 dB(A)
GB/IE
17