LORGAR LRG-CMT721 Manual Del Usuario página 4

TRIPOD MOUNTING MANUAL
① Unfold the folded tripod.
② Fasten the screw.
③ Adjust to a suitable height, and
then tighten screw.
④ Screw the 3/8" to 5/8" adapter on
top of tripod stand.
⑤ Screw shock mount on top of
adapter.
⑥ Loosen the screw and adjust the
angle, then fasten the screw.
⑦ Put the mic on the shock mount
⑧ Screw the metal nut to the buttom
of mic to fix the mic on the shock
mount.
⑨ Screw the pop filter screw to fix
to the tripod stand, then tighten the
screw. Adjust the pop filter position.
PLUG & PLAY
Plug the USB cable into the USB port of your computer. Your computer will
automatically recognize the USB device and install a driver. The driver will
be installed automatically. If the microphone is not picking up sound, please
follow the instructions below:
Problem
A computer couldn`t
identify the USB devices
The microphone is
detected but no output of
the sound
Lorgar Voicer 721 includes a standard 1/8"
(3.5mm) headphone jack for monitoring
and playback
7
5
8
Solution
Please restart a computer and connect
the microphone to another USB port.
Make sure that System Sound isn`t
mute and you haven`t set a microphone
volume to minimum.
6
4
3
9
2
1