Silk’n LED FACE MASK 100 Manual De Usuario página 28

2. Portable and mobile radio frequency communication equip-
ment may affect the proudct. Please keep away from such
equipment when using it.
3. In addition to the connecting wires and charging cables sold by
our company as spare parts of internal components, the use
of accessories and cables outside the regulations may result
in an increase in the emission of the product or a decrease in
immunity.
The following cable types must be used to ensure compliance
with and adherence to interference radiation and immunity
standards:
Cable
Power cord
Charging Cable
4. This product should not be used close to or stacked with
other equipment. If such use is necessary, the product should
be observed to verify that it can operate normally under the
configuration used.
5. This product should not touch the pins of the connectors
marked with the electrostatic discharge warning symbol, and
should not be connected to these connectors unless electro-
static discharge precautions are used. Provisions on preventive
measures against electrostatic discharge:
Human body or objects carry different electrostatic voltages
due to charge transfer; since electrostatic discharge is
completed in the order of ns or μs, the peak current can reach
tens of amperes, and the instantaneous power is very huge.
The resulting electrostatic discharge is electromagnetic. The
pulse energy is enough to damage the sensitive components
in the electronic components; because the rise time of the
current waveform is very short, that is, the rate of change of
the current (di/dt) is very large, it can induce a high potential of
hundreds of volts or even thousands of volts, thereby a strong
electric field is generated to break down the sensitive element.
In order to prevent damage to the instrument, the following
measures should be taken:
(1) Ensure the environmental humidity;
(2) Laying anti-static floor or carpet;
Length (m)
0.5
0.5
EN
28