Daylight Duo Pro Clamp Manual Del Usuario página 5

ENGLISH
IMPORTANT SAFETY INSTRUCTIONS – PLEASE SAVE FOR FUTURE REFERENCE
Thank you for purchasing this Daylight product. To ensure correct and safe operation please read
the following and retain for future reference.
SET-UP AND OPERATION
1. Remove all packaging from around the lamp.
2. Connect the power adapter jack to the connector at rear of the clamp and plug into a suitable
electrical socket.
3. Switch the lamp on by touching the symbol at the end of the lamp shade. Subsequent touches of
the symbol allows the 4 different brightness levels and OFF to be selected.
CAUTION: DO NOT LOOK DIRECTLY AT THE LEDS
CLEANING
BEFORE CLEANING MAKE SURE THE LAMP IS DISCONNECTED FROM THE ELECTRICAL SUPPLY.
If the lamp requires cleaning simply wipe with a damp cloth. Do not use large amounts of liquid or
spray cleaners as they may enter the lamp and affect electrical safety.
MAINTENANCE
No maintenance is required. The LEDs are not user replaceable as they are designed to last for the
lifetime of the product.
SAFETY
FOR INDOOR USE ONLY
CAUTION: DO NOT LOOK DIRECTLY AT THE LEDs.
CAUTION: If the cable of this luminaire becomes damaged, it should be exclusively replaced by a
suitably qualified person in order to avoid hazard.
IN CASE OF DOUBT CONSULT A QUALIFIED ELECTRICIAN
2