Descargar Imprimir esta página

LD Systems CE 360 Manual De Usuario página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
ATTENTION:
1. Do not install or operate the device near any radiators, storage heaters, stoves or other heat sources.
Ensure that the device is always installed in such a way that it is sufficiently cooled and cannot overheat.
2. Do not place ignition sources such as lighted candles near the device.
3. Ventilation openings must not be covered and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shock or impact to the device.
6. Observe the IP protection class as well as the ambient conditions such as temperature and humidity according to
the specification.
7. Devices can be continuously further developed. In the event of any discrepancies between the operating instruc-
tions and the device labelling with regard to operating conditions, performance or other device characteristics,
the information on the device always takes precedence.
8. The device is not suitable for tropical climates and for operation above 2000 m above sea level.
CAUTION:
Connecting signal cables can cause significant interference noise. Make sure that devices connected to the output are
muted while making connections. Otherwise, noise levels may cause damage.
CAUTION: HIGH VOLUME AUDIO PRODUCTS!
This device is designed for professional use. The commercial operation of this device is subject to the applicable
national regulations and guidelines for accident prevention.
Hearing damage due to high volume and continuous exposure: Use of this product may generate high sound
pressure levels (SPL) that may cause hearing damage. Avoid exposure to high volumes.
INSTRUCTIONS FOR INDOOR INSTALLATION EQUIPMENT
1. Devices for installation applications are designed for continuous operation.
2. Devices for indoor installation are not weather-resistant.
3. Surfaces and plastic parts can age even in installation equipment, e.g. due to UV radiation and temperature fluctua-
tions. This generally does not impair functionality.
4. With permanently installed devices, the accumulation of impurities, e.g. dust, is to be expected. Always observe the
care instructions.
5. Unless explicitly stated otherwise on the device, the devices are intended for installation heights of less than 5 m.
PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material. Please check the completeness and integrity of the
delivery and notify your distribution partner immediately after purchase if the delivery is not complete or if it is damaged.
The packaging includes:
• 1 x CE 360 pendant speaker with 5 m cable and cable clamp
• 1 x ceiling cup
• User manual
INTRODUCTION
The CE 360 is a simple 360-degree pendant loudspeaker designed to deliver consistent and even audio coverage. With a rated
power of 20 W and power tap options of 5 W, 10 W, and 20 W for 100 V speaker lines, it ensures versatile and robust sound delivery.
With frequency response ranging from 180 Hz – 10 kHz, it can achieve a maximum SPL of 105 dB. It has a sleek white design and
weighs just 2.42 kg. It is not only aesthetically pleasing but also functional.
The CE 360 comes with a 5 m suspension cable, making it effortless to install. An affordable and optimal choice for both speech
and background music applications. For a wide variety of applications where you need clear, wide audio coverage, the CE 360 is
your go-to solution.
5

Publicidad

loading

Este manual también es adecuado para:

Ldce360