Publicidad
Idiomas disponibles
Idiomas disponibles
•
During use, it is not advisable to stand in front of the appliance for a long time, especially if in the
direction of the flow: this circumstance has an impact on the health and well-being of the user on a
multi-system level; to mitigate the effects of the draft, it may help to start the rocking mechanism.
Use the appliance for its intended purposes only, as indicated in this instruction manual
•
3. PARTS IDENTIFICATION
Check that all the elements shown in the figure are present in the package: if there are any missing or
damaged parts, do not proceed with the assembly and commissioning in any way and contact the dealer to
have the equipment restored.
4. ASSEMBLY
A) Insert the fixed stem into the hole in the center of the basement and press it down.
B) Screw the stem fixing screw into the hole under the base as shown in the figure.
C) Turn the base upside down and place it on the ground on a horizontal and stable surface.
D) Turn the stem ring counterclockwise and pull the extractable stem completely out.
E) Fix the extractable stem by turning the ring clockwise.
F) Fully insert the motor unit (6 + 7 + 8 + 9 + 10) into the extractable stem as in the figure, matching
the screw with the special recess provided in the extractable stem; it may be helpful to slightly
unscrew the fixing of the stem (11), trying not to extract it completely so as not to let the internal
nut come out. In this case, refit the nut and partially tighten the fixing.
G) Rest the rear grid on the motor, orienting the handle upwards, so as to match the pins of the motor
plate with the central holes at the top of the center of the grid.
H) Screw the grid nut onto the motor thread by turning it clockwise until it is fully tightened.
I)
Insert the propeller on the motor shaft, taking care to match the cross pin of the shaft with the
groove on the rear part of the propeller.
J) Screw the propeller nut firmly onto the motor shaft by turning it counterclockwise.
1
Vite e dado griglie
2
Front grid
3
Propeller nut
4
Propeller
5
Grid nut
6
Rear grid
7
Drive shaft
8
Swing command
9
Motor
10
Command keyboard
11
Stem fixing
12
Extractable stem
13
Stem Ring
14
Fixed stem
15
Basement
16
Stem fixing screw
17
Power cord
Publicidad
