Richter PBI 115 Manual De Usuario página 7

Use on Carpet and Textile
Floors
Please check whether and in what setting the motor brush is suitable for
your floor type. (See „Suitability of the Motor Brush for Floors")
On carpeting or similar material, move the motor brush back and forth
with slow movements. On carpets with fringes, ensure you never brush
the fringe.
For delicate carpets or similar materials, we recommend you use the
soft SensiClean Plus brush roller (see section „Changing and Cleaning
the Brush Roller")
Use on Hard Floors
Please check whether and in what setting the motor brush is suitable
for your floor covering. (See „Suitability of the Motor Brush for Floors")
For smooth, hard floors, we recommend you use the SensiClean Plus
Brush Roller. Move the motor brush slowly and evenly back and forth.
Note
▪ We recommend you always use the vacuum cleaner in automatic
mode.
▪ Never leave the PB 115 working for any length of time in one place
as this may damage the floor.
▪ To avoid injury or damage, the PB 115 has an automatic switch
off function. If something gets drawn in and blocks the brush, the
motor brush automatically switches off. To remove whatever item is
causing the blockage, disconnect the motor brush from the power
supply! After you have removed the blockage, just switch on the motor
brush again.
Changing and Cleaning the
Brush Roller
Removing the Brush Roller
Disconnect the motor brush from the
power supply.
Turn the blue dial and remove the locking
device.
Lift the brush roller slightly and pull the
brush roller from the suction channel.
Remove any dirt, dust or hair from the
moving parts of the nozzle.
Inserting the Brush Roller
Insert the open gear end of the brush
roller into the suction channel with a slight
twisting motion and push it down until it
clicks into place.
Re-insert the locking device with a slight
tilt backwards and turn the blue dial back
to the locking positon.
If the locking device won't close, the brush
roller has not been correctly inserted.
Cleaning the Brush Roller
Please remove any dirt, dust or hair from
the brush roller regularly.
7
EN