Publicidad
Idiomas disponibles
Idiomas disponibles
EN
CS141 (HW161) SNMP / WEB / MODBUS MANAGER
Descrition
Function
1 COM-Port 1
Serial Interface to connect an UPS or another device with an original RS232 cable
2 COM-Port 2
Communication port to connect additional devices for use with CS141 devices:
GSM Modem, temperature and humidity sensor, SENSORMANAGER, Fieldbus devices
(MODBUS RS232, PROFIBUS, LONBus, etc.)
Available at CS141L-6, CS141SC-6,
Available at CS141LM-6 & CS141SCM-6 = RS485 (not equipped CS141BSC-6)
Ethernet 10/100/1000 Mbit Interface with integrated status LEDs
3 LAN-Port
Green LED: General connection indicator
Yellow LED: network traffic indicator
12 V switching power adapter input - only available for external CS141 devices
4 DC– Input
Additional port for connection CON_R_AUX4 and BACS
5 AUX
Available at CS141L-6, CS141LM-6, CS141SC-6, CS141SCM-6, CS141MINI-6,
CS141R_2-6
CS141 operating state
6 Status-LEDs
Unpacking and installing operating system during updateprocedure Red LED blinks
Unpacking failure during update procedure
Booting / powering up
Connections lost to external devices (UPS, Sensors, etc.)
Normal operation state—connection to all devices is OK
7 Sliding switch
Toggle different boot conditions
Sliding switch in center position: Configuration mode with hard-coded IP address: The CS141
can only be reached via the hard-coded IP - Address 10.10.10.10. The mode will be activated after
a reboot, choose between software reboot and cold start.
Sliding switch to right position: Automatic DHCP-mode - The CS141 will obtain an IP address
via local network infrastruction devices. Please check the MACAdress of the CS141 to find the
valid IP address at your DHCP server.
Sliding switch to left position: Manual IP address mode - Please configure IP address data ma-
nually.
8 USB
For internal use only.
9 Reset Button
This button to restarts the CS141 directly. All not saved data are lost.
The CS141 is more than a SNMP card, it is a full featured web manager with numerous options and provide plenty of accessory
space: As an example, the CS141 can be combined with a variety of environmental sensors and other measuring devices to measure
and monitor temperature, humidity, fire and smoke, motion and burglary, air pressure, fill levels, etc. - it can even capable write alarm
mails, send SMS messages, switch and toggle devices or comunicate with other systems.
CS141MINI-6,CS141MINITP2-6
& CS141R_2-6 = RS232
CS141MINITP2-6
LED condition alert:
Red LED blinks fast
Red LED is on
Red and green LED static on
Green LED blinks
Version: 2024-03-05
and
Publicidad
