Scotts LM71313S Manual Del Operario página 10

5. Thread through the holes on both sides of lower brackets and upper brackets and secure with a
bolt （M8x45） and nut（M8） for each side ( Fig 4).
Please note: always follow the directions shown in below.
6. Fit the funnel onto the assembled upper and lower brackets in the direction as shown in Fig 5. Insert
two ends of upper bracket into the slots located on the funnel and fasten the funnel to the
brackets by using screws. Make sure the funnel is placed correctly and securely (Fig. 5).
Fig 5
7. Align the funnel handle with the gaps on lower funnel as shown in Fig.6. When fully seated
into the gaps, secure with buckles.
ASSEMBLING
Fig. 4
Fig. 6
Model LM71313S
10