CARLO GAVAZZI EM24 Instrucciones De Uso página 8

EM24 IS use
Step Action
6 In the EnE PrES page, set YES
7 Confirm operation
Setting a parameter
Example procedure: how to set Ct rAtio=20 and save changes.
Step Action
1 Power on the energy analyzer
2 Press the joystick for at least 3 seconds
3 In the PASS? page, select the correct password (default 0)
4 Confirm operation
5 Scroll pages until Ct rAtio
6 Enter the editing mode
7 Select 20
8 Confirm operation
9 Scroll pages until End to exit
8 EM24 IS - Instruction manual | CARLO GAVAZZI Controls SpA
Button
Button