Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Introduction / Heater
INTRODUCTION
Over time, installation debris and corrosion residue can accumulate and form
sludge in the system. In addition, calcium and magnesium salts contained in
the water can form encrustations on the hottest parts of the system, such as
the heat exchangers, pipework and radiators. In lower temperature systems
like air source heat pumps and underfloor heating installations, organic growth
may also develop and create blockages. All of these contaminants can result in
a decrease in flow rate and heat output.
In order to remove these impurities and foulants, the heating circuit must be
thoroughly cleaned and/or descaled and flushed, using appropriate Sentinel
cleaning or descaling additives and the JetFlush Rapid+ pump.
All products are made from top-quality materials in order to achieve the best
performance, while operating with utmost safety.
PLEASE NOTE: When in use, the heating element and temperature probe must
be completely submerged in the liquid at all times.
HEATER
Operation and maintenance instruction manual.
Electrical thermostatic heating system to heat liquids.
These instructions provide the necessary information for the correct
installation and usage of the Heater.
6
Sentinel_JetFlush_Rapid_Heater_Manual_Sep23_V1_FINAL2.indd 6
Sentinel_JetFlush_Rapid_Heater_Manual_Sep23_V1_FINAL2.indd 6
JetFlush Rapid+ Heater V1 09/23
29/09/2023 11:15
29/09/2023 11:15
Publicidad
