Battery Installation And Replacement - Mx Onda MX-ED2345 Manual De Instrucciones

Do not use any accessory that is not recommended by
the manufacturer.
If the hardness remover is used by several people, it is
recommended (for hygiene) that each user uses a
different roller.
Do not leave the remover running on a surface hardness
as vibration could fall and be damaged.
Always stop unit who is absent from the place of use, and
keep out of reach of children.
The hardness remover is designed for use indoors, avoid
prolonged exposure to sunlight and store in a dry place
Waterproof: This device supports splashing water or other
non-corrosive liquids and can not be immersed in water or
other liquids.
Do not operate the appliance when the roller is not
positioned.
To avoid injury or accidents, keep away when using the
hair, clothing, appliance cords or tapes, etc.
Do not apply excessive pressure on the skin, for best
results gently slide the roller.
In case of failure, abnormal or if the appliance has been
dropped. Do not use the eliminator hardness and do not
try to repair it yourself. Contact our Customer Service
nearest MX ONDA.

BATTERY INSTALLATION AND REPLACEMENT

For inserting or replacing batteries follow these steps:
1. To open the lid of the battery compartment press lightly
on the arrow-mind while you slide outwards in the
direction of the arrow.
2. Insert three batteries (preferably alkaline) 1.5 V AAA,
respecting the + and - engraved into the compartment.
3. Replace the battery cover by sliding it until it is properly
retained, you hear a "click".
4