Publicidad
Idiomas disponibles
Idiomas disponibles
Using instructions
Warnings
Do not modify this appliance.
This appliance must be installed by an authorised technician or installer.
Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure)
and the adjustment of the appliance are compatible.
The adjustment conditions for this appliance are stated on the label (or data plate).
This appliance is not connected to a combustion products evacuation device. It should be installed
and connected in accordance with current installation regulations. Particular attention should be given
to the relevant requirements regarding ventilaton.
Before installing, turn off the gas and electricity supply to the appliance.
All appliances containing any electrical components must be earthed.
Ensure that the gas pipe and electrical cable are installed in such a way that they do not touch any
parts of the appliance which may become hot.
Gas pipe or connector shouldn't be bent or blocked by any other appliances.
Check the dimensions of the appliance as well as the dimensions of the gap to be cut in the kitchen unit.
The panels located above the work surface, directly next to the appliance, must be made of non-flam-
mable material. Both the stratified surfacing and the glue used to secure it should be heat resistant, to
prevent deterioration.
Turn on appliance tap and light each burners. Check for a clear blue flame without yellow tipping.
If burners shows any abnormalities check the following:
- Burner lid on correctly
- Flame spreader positioned correctly
- Burner vertically aligned with injector nipple
A full operational test and a test for possible leakages must be carried out by the fitter after installation.
The flexible hose shall be fitted in such a way that it cannot come into contact with a moveable part of
the housing unit and does not pass through any space susceptible of becoming congested.
Grease cranes produced at the factory to meet the requirement of all life hob.
Positioning
700mm
400mm
CLEARANCES REQUIRED
WHEN FITTING THE HOB
WITH A COOKER HOOD ABOVE
JAMA230BN
JAMA3BB
JAMA3BN1
JAMA3BX1
JAMA4BX/JAMA4BX1A
400mm
JAMA4BN1
JAMA4BN
JAMA4BX1
JAMA575BN
JAMA575BX
JAMA590BN
EN-14
Model
X
262
560
560
560
560
560
560
560
560
560
830
Y
Z
480
300
480
600
480
600
490
600
480
600
480
600
480
600
480
600
480
750
490
750
480
900
V.1
Publicidad
