Toshiba Carrier RBC-AXU31UP-UL Manual De Operaciones página 4

2
Changing batteries
Loading batteries
1
Remove the battery cover.
2
Insert 2 new batteries (R03 or LR03 [AAA])
following the (+) and (-) positions.
3
Adjusting clock
Setting the clock
Before you start operating the air conditioner, set the
clock of the remote controller using the procedures given
in this section. The clock panel on the remote controller
will indicate the time regardless of whether the air
conditioner is in use or not.
Initial setting
When batteries are inserted in the remote controller the
clock panel will indicate AM 0:00 and will flash.
COMFORT
SLEEP
1
TIMER or
ON OFF
Push the TIMER
time.
Each push of the TIMER button changes the time in
one minute steps.
Pushing the TIMER button continually changes the
time in ten minute steps.
2
SET button
SET
Push the SET
SET
The current time is indicated and the clock starts.
3-EN
1130615205_EN-ES-FR.indb 3 1130615205_EN-ES-FR.indb 3
Hi POWER
1
2
button
or button to set the current
ON OFF
button.
Removing batteries
1
Remove the battery cover.
2
Slap the batteries out lightly onto your
palm.
Batteries
To replace the batteries, use two new batteries
(R03 or LR03 [AAA]).
In normal use, the batteries will last about one year.
Replace the batteries if there is no receiving beep from
the indoor unit or when the air conditioner cannot be
operated using the remote controller.
To avoid malfunctions by battery leakage, remove the
batteries when not using the remote controller for
more than one month.
Adjusting clock
COMFORT
SLEEP
1
CLOCK button
Push the CLOCK
The CLOCK display flashes.
2
TIMER or button
ON OFF
Push the TIMER
ON
time.
Each push of the TIMER button changes the time by
one minute.
Pushing the TIMER button continually changes the
time by ten minutes.
3
SET button
SET
Push the SET button.
SET
The current time is indicated and the clock starts.
– 3 –
Hi POWER
2
3
1
by tip of a pencil.
or button to set the current
OFF
9/8/2565 BE 15:38 9/8/2565 BE 15:38