Vonyx VDX10 Manual De Instrucciones página 3

UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
CONTROLS AND CONNECTIONS
1. POWER INPUT
5VDC type-C USB power input.
2. SIGNAL OUTPUT
XLR signal output socket.
3. MICROPHONE INPUT
XLR microphone input socket.
4. POWER LED INDICATOR
LED indicator showing power status.
5. ON/OFF
Press to turn the device on/off.
SETUP EXAMPLE & INSTRUCTIONS
• Plug the female end of the supplied XLR cable into the XLR socket of a condenser microphone.
• Plug the male end of the supplied XLR cable into the microphone XLR socket of the device.
• Use another XLR type cable to plug into the signal output socket and connect with a mixer, sound card, or other device with a
balanced input.
• Turn on the device, the power LED indicator will light up. 48V phantom power will be provided to the condenser type
microphone to make it work.
WARNING: turn phantom power off when plugging and unplugging microphones to prevent any potential power surge, pops
and other loud noises, which could damage your speakers.
3