EDM Product 08471 Manual De Instrucciones página 20

ASSEMBLY INSTRUCTIONS
ES
UNPACKING THE BOX
After opening the box, remove all parts and compare them with the
following list of included pieces:
1. Handle
PT
2. Gun bracket
3. Switch
EN
4. Wheel x2
5. Cleaning needle
6. High pressure hose
FR 7. Water inlet connector
8. Detergent container
9. Hose holder and accessories
10. Nozzle
11. Gun
12. Lance extension
13. Power cable hook
Due to transport and packaging, some of the accessories may be
delivered disassembled. Please follow the assembly instructions.
ASSEMBLY
STEP 1
Instruction manual
Install the gun bracket (2) and the power cable hook (13).
STEP 2
Insert the wheels (4) into the machine body.
STEP 3
Screw the clamping plate (9) securely to the main body as shown in the
figure. The screws are included with the main body, please check them
and leave them handy when unpacking.
STEP 4
Screw the handle (1) firmly to the main body, as shown in the figure. The
screws are included with the main body, please check them and leave
them handy when unpacking.
STEP 5
Insert the lance extension (11) into the gun. Push and twist the
extension rod clockwise onto the gun (11) until it is hand tight to lock it
in place. When the parts are properly joined, the two components cannot
20
ref. 08471