Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
Bluetooth pairing mode:
Press the MODE button on the unit or remote control until Bluetooth is selected.
1. Bring the cell phone within 10 meters;
2.Activate the Bluetooth functions of your cell phone to start searching for the Bluetooth device. 3.
3.
Select the corresponding device name (Infiniton EQ07) on your cell phone. The cell phone will be
paired to the device.
4.
Briefly press the "Pause" button to play or pause the music. Short press the "Previous Song" or
"Next Song" key to select the previous or next track.
LINE IN mode:
Press the MODE button on the unit or remote control until LINE is selected. Play music from the device
connected to the LINE input.
USB / TF CARD mode:
1. After power on, press MODE button to select "USB or TF card" mode, or insert USB or TF card into this
speaker, the unit will play the songs automatically.
2. Short press "Pause" button to pause or play.
3. Short press "Previous song" key to go to the previous song.
4. Briefly press the "Next Song" button to go to the next song.
FM mode:
1. Turn on the device and repeatedly press the MODE button to select the FM function (the frequency is
shown on the display).
2. Press the play button to activate the automatic memorization (the tuner searches for available sta-
tions and memorizes them automatically). The number of memorized stations depends on the reception
in your area.
3. Use the next/previous buttons to listen to the memorized stations.
4. To select a preset station directly, press the corresponding number button on the remote control.
TWS mode:
It is possible to connect two speakers together in TWS mode.
1. Place the two TWS loudspeakers close to each other (the distance should not exceed 10 meters).
2. Switch on the two speakers, both speakers selected in Bluetooth mode,
Press and hold the TWS button of one of the speakers as the master speaker for 5 seconds.
If the TWS button of the master speaker is pressed for 5 seconds, the TWS connection will be established.
3. In TWS mode, press and hold the TWS button for about 5 seconds on either speaker or turn off the
speaker to exit TWS mode.
17
English
infiniton.es
Publicidad
