Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
English
Bluetooth pairing mode:
Press the MODE button on the unit or remote control until Bluetooth is selected.
1. Bring the cell phone within 10 meters;
2. Activate the Bluetooth functions of your cell phone to start searching for the Bluetooth device.
3. Select the corresponding device name (Infiniton EQ60) on your cell phone. The cell phone will be pai-
red to the device.
4. Briefly press the "Pause" button to play or pause the music. Short press the "Previous Song" or "Next
Song" key to select the previous or next track.
LINE IN mode:
Press the MODE button on the unit or remote control until LINE is selected. Play music from the device
connected to the LINE input.
USB mode:
1. After power on, press MODE button to select "USB" mode, or insert USB into this speaker, the unit will play
the songs automatically.
2. Short press "Pause" button to pause or play.
3. Short press "Previous song" key to go to the previous song.
4. Briefly press the "Next Song" button to go to the next song.
TWS mode:
It is possible to connect two speakers together in TWS mode.
1. Place the two TWS loudspeakers close to each other (the distance should not exceed 10 meters).
2. Switch on the two speakers, both speakers selected in Bluetooth mode,
Press and hold the TWS button of one of the speakers as the master speaker for 5 seconds.
If the TWS button of the master speaker is pressed for 5 seconds, the TWS connection will be established.
3. In TWS mode, press and hold the TWS button for about 5 seconds on either speaker or turn off the
speaker to exit TWS mode.
19
infiniton.es
Publicidad
