Important information
Delivery contents
Digital photo viewer
Power adaptor
Stand
User manual
Important information
For your safety
The device should only be used as described within these instructions.
Caution!
Risk of electrocution!
Plug the device only into a mains socket installed within your country's electrical safety regulations and
with a correct mains voltage (see nameplate).
The mains socket must be located near the equipment and it must be easily accessible.
Unplug the device immediately if any fault occurs.
The device and the power adapter must not come into contact with water or moisture.
Do not use the device if the housing or the power adapter are damaged.
Operate the device out of reach of persons (including children) who cannot fully appreciate the poten-
tial risks of handling electrical equipment.
Only use the supplied power adapter.
Route the mains cable so it does not come into contact with sharp-edged or hot objects.
Caution!
Risk of injury:
Keep this device out of reach of children.
Small parts can be swallowed by children (under three years old).
CAUTION
Unauthorised repairs, alterations or changes to the product are prohibited.
Do not expose the device to extreme temperatures, vibrations or shocks.
Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
The device is suitable for indoor use only.
Getting started
Insert the power adapter pin into the device jack and connect the plug to a wall socket.
The device is ready for use.
When starting your frame for the fi rst time, you will need to set it up.
Follow the on-screen instructions or the quick set-up in the user manual.
FRAMEO-App
You need the FRAMEO app for operation. Download the free FRAMEO app from the "Apple App Store" or
"Google Play Store".
Installation
With the suspension device you can fi x the device with a nail or a solid screw and dowel on
a wall (vertically or horizontally).
For table standing plug the device to the attached support.