Publicidad
Idiomas disponibles
Idiomas disponibles
SUMMER FUNCTION:
• The blades rotate in an anticlockwise direction. The
movement of the blades generates a breeze that reduces
the high ambient temperatures and provides a pleasant
sensation of freshness.
WINTER FUNCTION:
• The blades rotate in a clockwise direction. In this way, the
fan drives the hot air accumulated on the ceiling of the
room downwards, balancing the room temperature and
creating a cozy climate.
NIGHT MODE:
• By pressing the button (6), the fan will decrease the
speed of the blades from the speed that is currently
settled to speed 1. This process lasts 1 hour and then it
will remain at speed 1. Recommended for sleeping.
LIGHT:
• Press button (5) to turn the light on/off. To change colour
of the light, press the button (5) again.
IMPORTANT: When turning the light on and off, if it takes
more than 10 seconds to turn the light on again, it will keep
the same colour. If it takes less than 10 seconds, the light
colour will change.
• You can choose between three different light modes:
Cold, natural and warm
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
• Turn the fan off using the on/off button.
• Turn the appliance off, by using the wall switch.
MAINTENANCE
• Here are some suggestions to help you maintain your fan.
• Because of the fan's natural movement, some
connections may become loose. Check the support
connections, brackets, and blade attachments twice a
year. Make sure they are secure. (It is not necessary to
remove the fan from the ceiling.)
• Clean your fan periodically to help maintain its new
appearance over the years. Use only a soft brush or
lint-free cloth to avoid scratching the finish. The plating
is sealed with a lacquer to minimize discolouration or
tarnishing. Do not use water when cleaning. This could
damage the motor or possibly cause an electric shock.
• There is no need to oil your fan. The motor has
permanently lubricated sealed ball bearings.
CLEANING
• Cut off the power supply before undertaking any cleaning
task.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
• If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.
BALANCING KIT
• Your ceiling fan may sometimes have wobbling problems
when operating due to irregularity in blades or the blade
holders. Also, improper assembly in the mounting system,
for example if the blades are crooked, may cause some
additional problems. The following procedure to solve
such problem is strongly recommended.
Note: The balancing kit should only be used if the blades
wobble in excess after completing the assembly.
1. Turn the fan on and adjust the speed control to the
highest setting.
2. Turn the fan off and wait until blades stop rotating
completely.
3. Select one blade and place the balancing clip on it,
halfway between the blade holder and the blade tip on
the rear edge of the blade.
4. Turn the fan on. Check if the wobbling is improved or
worsened. Turn the fan off again and move the clip to
Publicidad
