Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 13 Thursday, February 22, 2024 4:27 PM
Vertical Ducting Preparation
1
Remove baffle filters by:
toward front of liner.
down.
2
Remove grease tray by:
to release from bottom panel.
out of liner body.
3
(If applicable) Remove left and right side-
spacer panels by removing (2) screws from
behind each panel.
4
Remove bottom panel by:
screws from left and right sides of bottom
panel.
Pulling bottom panel toward front of
B
liner to release from locking tabs.
Pulling filter
A
Pivoting rear of filter
B
Pulling up on tray
A
Lifting tray
B
Removing (2)
A
Bottom Panel Screws
a
Locking Tabs
b
5
Secure 8" round adapter or 10" round adapter
to top of liner by (4) M4 x 6 mm screws.
6
Vertical ducting preparation is complete.
Refer to Mounting the Range Hood, step 4 to
complete installation.
INSTALLATION
13
Publicidad
