Publicidad
Idiomas disponibles
Idiomas disponibles
Connect the end of the USB cable to the power input interface and the other
end to the power output. You can also use a USB 5V output device to ensure the
power supply.
•
(1) ON / OFF button:
Brief touch: Lamp ON/OFF
•
(2) Brightness switch:
Touch the slider to adjust the brightness. Press "+" to increase the bright-
ness. Press "-" to decrease the brightness.
•
(3) Colour temperature button:
Brief press: The colour temperature of the different lamps can be changed
cyclically (natural light → cold white light → warm white light).
Adjusting the angle
Hold the bracket firmly, press the lamp rod slightly and move it up and down to
adjust to the desired angle. The maximum angle is 35 °.
Caution!
5. Safety instructions and disclaimer
Never try to open the device to repair or make modifications. Avoid contact with
the mains voltage. Do not short-circuit the product. The device is not waterproof,
hence please use it only in dry surroundings. Protect it from high humidity, water
and snow. Keep the device away from high temperatures. Do not expose the de-
vice to sudden changes in temperature or strong vibrations, as this could damage
the electronic components. Check the device for any damage before using it. The
device should not be used if it was subject to impact or has been damaged in some
other manner. Please comply with the local regulations and restrictions.
Do not use the device for purposes other than those described in the user manual.
This product is not a toy. Keep it out of the reach of children or mentally disabled
persons. Any repair or modifications to the device, which is not carried out by the
original supplier will void any warranty and guarantee claims. The device should
only be used by those who have read and understood this user manual. The speci-
fications of the device may be changed without prior notification.
English
9
Publicidad
