Publicidad
Idiomas disponibles
Idiomas disponibles
to remove and fit outlet covers
High-speed outlet cover
1 To remove the cover, use the grip and lift upwards.
2 To fit, place the cover over the outlet and push downwards.
to fit and remove your stir assist clip
The stir assist clip can be used to assist the mixing action.
1 Slot the stir assist clip over the side of the bowl with the
vertical ridge on the inside and the clips on the outside
2 Turn the clip anti-clockwise onto the bowl handles
assembling the high temperature creaming beater
fitting the wiper blade
The wiper blade is supplied already fitted and should always
be removed before cleaning.
5720000723 Iss 2 KCC90 Eng_Fre_Ger_Ital_Sp.A4..indd 21
.
.
21
Slow-speed outlet cover
1 To remove the cover, use the grip on the underside and pull
outwards.
2 To fit, locate the catch at the top of the cover into the outlet
recess and push to clip into position.
3 To remove, reverse the procedure.
IMPORTANT - The stir assist clip should not be fitted when
using the K beater, whisk, dough hook or creaming beater.
1 Carefully fit the flexible wiper blade onto the tool by locating
the base of the wiper blade into the slot then fit one side into
the groove before gently hooking the end in place. Repeat
with the other side.
23/11/2016 09:07
Publicidad
