Led - Aros APPENDIX 1500 Manual De Instrucciones

Operating
conditions
Output DC sensor
abnormal
GFCI detection
problem
Model display
LCD contrast setting
LCD display lock
Waiting for
reconnection to the
grid
Firmware version
Setting Language

10.2 LED

There are 2 LED's on the PV-inverter, one is green and the other is red. Normally, only
the green LED is illuminated during operation. The indicated status of these LED's is
as follows:
1. Power on (green LED): This is illuminated when the inverter is feeding the grid.
2. Fault (red LED): When illuminated, it means that the inverter has a "fault" or
"failure" condition. The details of the various conditions can be found in the table
above.
Page 32
- ENGLISH -
Message in
English
Inverter fault
DC Sensor Fault
GFCI Failure
Inverter information
XXXX W
Set Contrast
Lock
Reconnect in xxx sec
Ver xx.xx
Set Language
Description
The DC output sensor is faulty
The GFCI detection circuit is faulty
Inverter model, xkW inverter
Setting the LCD contrast
Holding the present displayed message
The time for the reconnection to the grid
F/W version information
Set up of the displayed language