Crivit SP-154 Modo De Empleo página 4

Idiomas disponibles

Bicycle helmet / LED-rear light SP-154

User information

1. The correct helmet position

• The helmet must always be levelly horizontal on your head (Fig. A).

• If the helmet is too far forward, it can impair your vision.

• If the helmet is too far back, your forehead is not sufficiently protected (Fig. B).

2. Adjusting the single-hand twisting fastener

The integrated size-adjusting system can be adjusted using a turning knob at the back of

one's head (Fig. C):

• smaller = twist clockwise

3. Adjusting the strap divider

• Open the strap divider (Fig. D).

• The strap divider must be positioned in such a way, that the straps are taut but

comfortable. The strap divider must be below the ear, and the straps must not cover the ears.

• Close the strap divider (Fig. E).

An open strap divider can lead to slipping of the helmet in the event

of an accident and thus to a loss of protection!!!

4. Adjusting the chin strap

• The chin strap (Fig. G.3) has been adjusted correctly if you feel slight pressure when you

open your mouth. The buckle shall not be positioned on the jawbone.

• If the chin strap (Fig. G.3) is too loose it must be pulled tight using the winding (Fig.G.2)

on the fastener (Fig. G.1).

• If the chin strap (Fig. G.3) is too tight it must be loosened also using the winding (Fig.G.2)

on the fastener (Fig. G.1).

Please note that you must always make sure that the fastener is

closed before you ride !!! (Fig. F)

Please be aware that the helmet can only protect if it fits properly.

Please try out different sizes and choose the one in which the helmet

fits comfortably and sits firmly upon your head.

PO-2024-68_Lidl_BDA Fahrradhelm Adult_SP-154_Inside_LB8_short_revised.indd 6

• bigger = twist anti-clockwise

29.12.2023 11:51:09