Publicidad
Idiomas disponibles
Idiomas disponibles
42
Washer
Washer pauses
during the spin
cycle
Can hear but not
see the water at
the end of the cycle
Pauses of the
washing machine
during the
agitation
Performance
(washer)
Washer won't
operate
Movement inside
machine when
Led turns on
and o during
agitation
Possible causes
This is
normal
This is
normal
This is normal for
some models that
have the extended
cycle program
Possible causes
Washer is unplugged
Water supply
Controls are not
set properly
Lid is open – the
safety feature is
preventing agitation
and spinning when
the lid is open
The circuit breaker/
fuse is tripped/blown
Electronics need
to be reset
START was not pressed
Lid magnet is missing
Shif
ting mechanism is
disengaging to return
to initial position
(only in spin)
This can happen in
large loads
What to do
The washer can be paused during the
spin cycle to remove water containing
.
P
ump is leaving water at inlet and it is
diluted with soap and clean water
The white cycle is an extended cycle which
is designed to remove di cult spots by
soaking it so that it does not mistreat it,
facilitating the elimination of stains. This
cycle lasts approximately 4.00 hrs.
Depending on the water pressure
What to do
Make sure cord is plugged securely into a
working outlet.
Turn both hot and cold faucets fully on.
Check controls.
Close lid and restart cycle, from the
beginning if necessary.
Check house circuit breakers/fuses.
Replace fuses or reset breaker.
Washer should have a separate outlet.
Unplug washer, wait 2 minutes, plug back
in, and press START.
Press START.
Call for service.
the shifter will disengage the motor
before completely shutting down
(only in spin).
If the lid is raised before the motor is
disengaged, it will resume when lid is
closed
This can happen with large loads if the
system detects a severe shocks, press the
start/pause button 4 to 5 times, if the
problem persists call the service area
,
ash).
Publicidad
