Publicidad
EC DECLARATION OF INCORPORATION
In Accordance with the Machinery Directive 2006/42/EC
Victaulic Company, headquartered at 4901 Kesslersville Road, Easton, PA 18040, USA, hereby declares
that the machinery listed below complies with the essential safety requirements of the Machinery
Directive, 2006/42/EC.
Product Model:
Serial No. :
Product Description:
Conformity Assessment:
Technical Documentation:
Compatible Power Drives:
Authorized Representative:
Signed for and on behalf of Victaulic Company,
Mr. Len R. Swantek
Director – Global Regulatory Compliance
Machinery Manufacturer Representative
Place of Issue: Easton, Pennsylvania, USA
Date of Issue: April 24, 2018
MD_DoI_RGT_009_042418_en.docx
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. ©2013 VICTAULIC COMPANY. ALL RIGHTS RESERVED
PC3110
Refer to Machinery Nameplate
Portable pipe cutting and marking tool
2006/42/EC, Annex I
The relevant technical documentation prepared in
accordance with Annex VII (B) of the Machinery Directive
2006/42/EC, will be made available upon request to the
governing authorities.
When installed with the following power drive unit,
having an appropriate EC Declaration of Conformity in
accordance with Annex II (A) of the Directive
2006/42/EC, the PC3110 model listed above may be
commissioned for the full intended purpose:
Ridgid 300
Victaulic Company
c/o Victaulic Europe BVBA
Prijkelstraat 36
9810, Nazareth
Belgium
.
Publicidad
