Beper 40.982A Manual De Instrucciones página 10

Rechargeable Shaver Use instructions
HOW TO CHARGE
Charge the shaver between 5°C and 35°C. Do not expose the shaver to high temperatures for too
long.
Before charging the shaver, make sure the appliance is turned off.
Using the cord supply, plug the shaver to the socket. The charge indicator (6) will illuminate (red
light).
When charging for first time, keep the shaver plugged on the socket for 15 consecutive hours. The
next charges will last about 8 hours.
For better results and lifetime, it is recommended to charge the battery when completely low.
USE INSTRUCTION
You can use the shaver directly connected to the socket or using the battery.
Make sure the shaver does not enter in contact with water.
Foe a better shave it is recommended to shave on dry skin, before washing your face.
Turn on the shaver with switch on/off (5).
Let the shaver runs quickly on the skin, with linear and circular movements.
Hold your skin with your hand and start shaving to get better results.
It will take from two to four weeks to the skin to accommodate completely to the shaving system.
Use the trimmer (9) for trimming temple, mustache push the slide face upwards to open the outer
cutter button (8).
Push switch on/off (5) to turn off the shaver.
CLEANING
Once a week clean the blade with the shaver rotating blades (2) using the brush (10).
Press the Switch to remove blade (3) and clean inside.
The shaver rotating blades can be washed under running water.
After use always clean the shaver rotating blades (2) and trimmer (9).
It is possible to clean (about every 6 months) the shaver rotating blades (2) with alcohol.
If necessary, use oil for sewing machine to lubricate the shaver rotating blades (2) and trimmer (9).
TECHNICAL DATA
Power supply: 220-240V ~ 50/60Hz
Power: 3W
Charging time : 8 hours
Battery duration : 30 minutes
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
10