Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Soldering tip temperature: up to 400°C
Hot blow head temperature: up to 1300°C
Gas container capacity: 26 ml
Operating time: 100 - 120 min.
Dimension: 220 x Ø 30 mm
Weight: approx.124 g
CONTENTS
1
Gas soldering iron
2
Protection cap
3
Solder
4
Iron Stands
5
Heating Needle
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This gas-powered soldering iron is used for soldering cables, welding plastics and heating smaller
components. The soldering iron is therefore used in the repair of control cabinets, jewelry, circuit
boards and in the automotive sector.
SICHERHEITSHINWEISE
● Keep children and other persons away from the working area.
● Do not allow children to play with this tool or its packaging.
● Do not use the tool if parts are missing or damaged.
● Use the tool for the intended purpose only.
● The burning tip and other accessory tips become hot during use. Do not touch the tip or
accessories or place them on flammable objects.
● Have a fire extinguisher or bucket of water handy when working.
● Always keep the device away from you when igniting and working. The flame is not visible in
sunlight and can therefore cause injuries. Always work with extreme caution.
● Under no circumstances should you attempt to repair damage to the gas soldering iron.
● Never store in direct sunlight; the maximum storage temperature must not exceed 40°C
(104°F).
● Never immerse the device in water.
● Make sure that after using the flame regulators it is tightly closed and the flame is completely
extinguished.
● Always work in well-ventilated areas.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Gas Soldering Iron Set
6
7
8
9
10
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Soldering Tip (flattened on both sides)
Soldering Tip
Soldering Tip (flattened on one side)
Heating Block
Deflection Sheet
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 9942
Publicidad
