CASO DESIGN IceChef Compact Manual Del Usuario página 70

DE
2.2 Control Panel
EN
ES
12
SV
FR
13
IT
NL
14
RU
PT
15
ADD WATER
TR
HE
2.3 Rating plate
AR
The rating plate with the connection and performance data can be founded on the back
of the device.
3 Operation and Handling
This chapter provides you with important information and notes on the operation and
basic settings of the appliance.
3.1 Before first use
Clean the device as described in the "Cleaning and maintenance" section.
3.2 Operation
PLEASE NOTE
f
Wait for 2 hours before you switch the ice cube maker on. This time is required for the
cooling agent to settle.
f
The recommended room temperature is 10 °C to 32 °C.
1.
Check that the silicone plug is correctly inserted into the water outlet on the undersi-
de of the device.
2.
Place the device on a stable, flat surface.
3. Open the transparent cover (11) and remove the ice cube basket (1).
4.
You will find a filter (4) at the bottom of the water tank (3). Make sure that the filter is
firmly inserted.
5.
Fill the water tank (3) with fresh drinking water. Pay attention to the "MAX" mark.
6. Replace the ice cube basket and close the device cover.
7.
Plug the power socket into mains power.
8.
Switch the device on by pressing the "On/Off" button (17).
9.
Use the selection button (16) to select the desired ice cube size.
70 CASO IceChef Compact
SMALL
LARGE
ICE FULL
Control lights:
Small ice cubes
12
16
13 Large ice cubes
14
The ice cube basket is full
15
Add water
17 Buttons:
Select ice cube size
16
17 On/Off button