Publicidad
Idiomas disponibles
Idiomas disponibles
Watch your hands.
Take care of your belongings.
Flat storage treadmill . Please
Do not get on and off when
keep it away from children.
the treadmill operating.
7. Care and Maintenance
1. Treadmill cleaning
Do not fold before power off.
2. Running belt slippage and adjustment
3. Running belt lubrication
10kg
50kg
50kg
Weight capacity≤110kg
• Turn off and unplug the Treadmill.
• Apply an appropriate amount of soft detergent to a piece of 100% cotton cloth. Do not spray
the detergent directly on the running belt or use any acid or corrosive detergent.
• Do not wipe under the running belt.
• Clean the dust and stains that might appear on the ground behind the product tail after use
for a period of time.
• Running belt moves to left: Rotate the left adjusting screw for a 1/4 circle clockwise.
• Running belt moves to right: Rotate the right adjusting screw for a 1/4 circle clockwise.
• Running belt slippage: Rotate the left and right adjusting screws for a 1/2 circle clockwise
respectively at the same time.
• After each adjustment, the Treadmill needs to run for 1 to 2 minutes at a speed of 3 to 4km/h
to verify the adjustment. If necessary, please adjust again.
• Turn off and unplug the Treadmill.
• Uplift the edge of the running belt, and apply silicone oil to its inner surface. It is easier to
operate when the Treadmill is not fully unfolded.
• Start the Treadmill, let it run at a speed of 3km/h for 10 to 20 seconds before use.
• Apply 5 to 10ml of silicone oil for lubrication each time, to avoid slipping and any negative
impacts caused by the excessive use of silicone oil.
• Lubricate the running belt every three months.
Publicidad
