CLEANING AND MAINTENANCE
The fan requires minimal maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed.
1. Before cleaning and assembling, unplug the fan power.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor
free of dust.
Do not disassemble the fan to remove dust. Please wipe the exterior parts with a soft
cloth soaking a mild detergent.
3. Do not use any abrasive detergent or solvents to avoid scratching the surface.
4. Do not use any of the following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid entering into the motor housing or interior
parts.
6. Be sure to unplug from the electrical supply source before cleaning.
7. Plastic parts should be cleaned with a soft cloth moisten with mild soap. Thoroughly
remove soapsuds with dry cloth.
Cleaning Instructions
1. How to disassemble the fan body from the motor base
Before detaching the body from base, turn off the power switch and unplug it, then turn
the latch on the back to the far left, hold the back of the body by the molded handle and
lift vertically upwards to detach the body from the base.
Molded Handle
12
EN