Marshalltown FS213-L Manual Del Usuario página 6

3. Attach Table Assembly (A) and Shear Assembly
(B) using hardware set G.
5. Attach Handle Base (C) to Shear Assembly (B) using
one screw from hardware set H. Press the Handle
Base (C) down and insert Cam Locking Pin (K).
7. Press in the spring button and insert Handle
Extension (E) into Handle Base (C).
6 of 48
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
4. Attach the bed brace extrusion from the Table
Assembly (A) to the Shear Assembly (B) using
hardware set F.
6. Remove Handle Base (C), insert End Cap (L) bevel
side down into Handle Base (C) and reattach to
Shear Assembly (B) using hardware set H.
8. Place the Bed Fence (D) in two holes on the right
side of Table Assembly (A) and attach using
hardware set I.
WS2179