Vlectro 20W Speaker Manual De Instrucciones página 19

LED Indicator Instruction
1. Status indicator on the right
a. Blue LED blinks when the speaker waiting for connection, and turns solidblue after Bluetooth connected
successful.
b. On TF mode will stay solid blue; On AUX mode bluetooth will stay solid blue,
2. Power indicator on the left
a. When Power On, the power Indicator will turn white
b. When the volume is maximum or minimum, the white indicator is flashing
c. When charging will stay solid red; When low power red led blinks
Micro SD/AUX Mode
1. Max support reading 64GB Micro SD card, support music files: APE/FLAC/WAV/MP3.
2. Insert any Micro SD card, the speaker will play the audio files in the Micro SD card automatically.
3. Speaker can connect with any 3.5mm audio cable to play music, if your device connected Vlectro 20W
Speaker pIs press "M" to switch TF or AUX.
Bluetooth Pairing
When speaker is power on, the blue LED will blink. Go to Bluetooth setting on your device, find "Vlectro 20W
Speaker" and select to pair.
TWS
TWS means true wireless stereo. Let's say two Bluetooth speakers are able to be paired and playing music
synchronously.
How to pair your device?
1. Please make sure these two speakers to be paired disconnect from your bluetooth device before you turn
them on. Then please turn on two speakers.
2. Select either of the speakers. Press "MODE" button for 2 seconds. until you hear indicator tone
3.When successfully paired, The LED indication light on either speaker will stay blue, and the other speaker
will flash blue.
4. Select the searching mode on your device, when your device finds "Vlectro 20W Speaker", select it and
connect.
5. The LED indication light on both the speakers will turn blue when your device is connected. They will
perform as the stereo sounding system.
6. Once the speakers are well paired at the first time, they will be automatically paired next time without
the above pairing operation.
7. If the speaker used to be paired, it is suggested to press "MODE" button for 5 seconds to forcibly cut off
the power. Then restart and have the same speaker re-paired with the required new speaker according to
the above instruction item 1- item 5.
8. When speakers are paired, only the "master" speaker will answer the phone.
19
EN