3.6
Automatic file upload
The automatic file upload settings let you configure which dictation files are automatically
uploaded to the FTP server when a Digital Pocket Memo is connected to the LAN Docking
station.
Open the LAN Docking Station
1
configuration interface by entering its IP
address in your Web browser or using the
Administration tool.
Choose how the automatic file upload
2
settings should be determined:
•
If you want the configuration settings
of the connected Digital Pocket Memo
to determine which dictation files
are uploaded, then check the
CONFIGURATION DEFINES FILES
TO UPLOAD
to step
. Refer to the Digital Pocket Memo User Manual on configuring automatic file
5
upload settings.
If you want to configure automatic file upload settings here, check the
•
STATION DEFINES UPLOAD SETTINGS
of the connected Digital Pocket Memo will be ignored.
Choose which files should be uploaded when a Digital Pocket Memo is connected to the LAN
3
Docking Station:
•
Check the
UPLOAD ALL DICTATION FILES
be uploaded when a Digital Pocket Memo is connected.
•
Check the
EOL DICTATION FILES ONLY
dictation files that have been marked finished with the EOL (End-of-Letter) button.
Check the
DELETE UPLOADED
4
Digital Pocket Memo that have been successfully uploaded to the FTP server. Clear the check
box if you want to leave the uploaded files on the Digital Pocket Memo.
Press the
SUBMIT
5
12
DPM
radio button and skip
check box if you want to delete dictation files from the
button at the bottom of the panel to save your changes.
radio button. In this case, configuration settings
radio button if you want all dictation files to
radio button if you only want to upload
LAN DOCKING
User manual