Vonyx MS10TH Manual De Instrucciones página 3

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the
product in order to benefit fully from all features. Keep the manual for future reference.
Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear
damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging
materials. If the product must be returned, it is important that the product is returned in the original factory box and
packaging.
1. Slide the three legs flush onto the ground and turn the locking knob on the base clockwise to secure the tripod.
(illustration 1)
2. Turn the high adjustment grip clockwise to adjust the height of the stand by sliding the extension tube up from
the base tube. Tighten the high adjustment grip again when it is at the desired height. (Illustration 2)
3. Tighten the gooseneck onto the extension tube thread. (Illustration 3)
4. Loosen the quick release adjuster to position the swing arm for the microphone at an angle or in the desired
position. Tighten the release adjuster again when it is in the desired position. (Illustration 4)
5. Snap the tablet holder onto the gooseneck ball. (Illustration 5)
6. The cables can be clamped by means of the clamp on the base tube. (Illustration 6)
3
ENGLISH
UNPACKING INSTRUCTION
STAND ASSEMBLY INSTRUCTIONS