All-Reset - BREIL AS10 Manual De Instrucciones

I

ALL-RESET

This watch may not function properly as a result of being subjected to the effects of static
electricity or strong impact and so forth. When this happens, set the hands of the watch
to their respective base position according to the following procedure after performing the
all-reset procedure.
1. Turn the crown to set the mode hand to the chronograph [CHR] mode.
2. Pull out the crown to Position (2) (0-position correction mode)
• Each of the hands and date wheel move to their respective 0 positions stored in
memory and then stop.
3. Press button
• Following a confirmation tone, each of the hands perform a demonstration
movement in the order of the function hand, 24 hour hand, hour hand, minute hand
and second hand to indicate that the all-reset procedure is finished.
Note: Following the all-reset procedure, make sure to properly reset each mode
after performing 0-position correction for each hand before using the watch.
24
6
18
12
and simultaneously and then release.
0-Position Correction
.0
(2)
.2
.8
.6 .4
21