Forgeon CLUTCH WIRELESS Manual De Instrucciones página 4

CONNECTIONS
EN
Turn on the button on the bottom to enter wireless mode.
Switch to off and plug the USB cable to enter wired mode.
Fn+A change to Windows layout, Fn+S to Mac layout.
Bluetooth
According to the device channel to be connected, pressing Fn + Q/W/E for more
than 5 seconds, Q/W/E will flash blue and start searching for the device. After the
connection is successful, the blue light will go out.
FN+T can indicate which channel you are connecting to. Clutch wireless supports up to
three devices.
2.4GHz
Press FN+R, the green light of the R key will flash, then plug in the USB receiver to start
connection, the green light of the R key will go out after the connection is successful.