Publicidad
Idiomas disponibles
Idiomas disponibles
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
• On/Off switch (2)
• Switching on: Push forward, the on/
off switch locks in place
Supplied attachment tools
Attachment tool
HCS plunge cut saw blade
32 mm
Diamond saw blade
Scraper blade
Sanding plate
Attaching and removing the
attachment tool
Notes
• It is not necessary to remove the clamp-
ing nut for the supplied attachment
tools.
• Make sure that the tool holder fits when
using third-party attachment tools.
• Wear hand protection when attaching
and removing cutting tools.
• Rotary wheel (3)
Materials
Wood, plastic, plaster and
other soft materials
Tile adhesive, tile joints
Mortar/concrete residues,
tile/carpet adhesive, paint/
silicone residues
Wood and metal (sanding
sheets included)
Procedure
1. Fold the clamping lever ( 1 ) 180° for-
2. Only attachment tool with closed end:
3. Remove the attachment tool.
4. Place an attachment tool on the tool
• Switching off: Push backward
• Set the oscillation rate in 6 incre-
ments.
• The required oscillation rate de-
pends on the material and the work-
ing conditions and can be determ-
ined by practical testing.
Application
• Cut-off and plunge cuts
• Sawing on edges and
hard-to-reach areas
Example: Sawing recesses
on lightweight walls
• Removal of material
residues
Example: Tile adhesive
when replacing damaged
tiles
• Milling out grout on wall
and floor tiles
•
Removal of material
residues, for example car-
pet adhesive residues on
the floor
•
Sanding on edges and
hard-to-reach areas
wards.
Remove the clamping nut ( 13 ).
holder ( 12 ). The pins in the tool hold-
er fit into the holes in the attachment
tool. If the attachment tool has an in-
scription, the inscription faces up.
GB
MT
31
Publicidad
