Aike AK2630S Guia Del Usuario página 2

Cautions
Do not open the front panel.
Otherwise it may cause electric shock risk.
Do not let children hanging on the unit.
Otherwise the unit may be risk of falling.
Prohibited
Do not place other items on the machine.
Do not use in places where water is directly
splashed or in places where it is prone to freezing.
Prohibited the
Otherwise It may cause electric shock and unit malfunction.
use in bathroom
and showers
Do not splash water.
Otherwise it may cause electric shock risk.
Do not spray
water
Do not reform and perform unnecessary disassembling.
Otherwise it may cause fire, electric shock and injury accidents.
Prohibition of
disassembling
Power must be turn off during maintenance.
Otherwise it may cause electric shock risk.
Please use rated voltage.
If the rated voltage exceeds ±10%, the unit will malfunction. It
may cause fire,electric shock and unit malfunction if an incorrect
power source is used.
Use fixed lines.
Please follow
If used in combination with other appliances, it may cause abn-
with instructions
ormal heat in the shunt outlet and cause fire.
If the unit is not working or have abnormal conditions, Please cut off
the power supply and turn off the leakage circuit breaker to prevent
accidents,then contact the supplier to check or maintenance.
Otherwise it may result in fire accidents due to electric shock,
leakage, and short circuit.
Leakage circuit breaker must be installed.
Otherwise it may cause electric shock risk.
If the cord is damaged, it must be replaced by the manufacturer or
professional to avoid risk.
It must operated by the professional construction person when install
Warning
the unit.
Incorrect construction may cause electric shock and fire accidents.
EN
Warning
Improper use may
result in personal
injury accidents.
1
Parameters
Model AK2630S
Rated Voltage AC220V
Rated Input Power 1400w
Air Speed 105m/s
Net Weight 3.0kg
Dimensions 250*165*238mm
Instructions
1.When the hand is within about 15-20cm below the air outlet, the machine will automatically start
the high-speed wind. When using, you can adjust the distance between your hands and the air outlet
by yourself until your hands are dried. After the hand leave the air outlet for about 0.5 seconds, the
machine stops working immediately.
2.In order to avoid abnormal startup caused by the object passing through the induction area, the
sensor needs to be activated after 0.2 seconds of induction.
3.After the hand dryer runs continuously for more than 45 seconds, it will automatically stop working to
avoid the continuous operation of the machine due to other objects attached to the sensor.
POWER POWER
CHECK CHECK
With the back of the With the palm up,
hand up, move slowly move slowly back
back and forth. and forth.
EN
Motor Power 550w
Motor brush motor
15-20cm
Sensing Distance
Waterproof IP24
Anti-shock Category Ⅱ
POWER
CHECK
POWER
CHECK
Rub hands with
each other.
2